Manufacturing with 80 000 rot/min
2023-08-21![](https://marketool.hu/wp-content/uploads/2023/08/metszet-abra-2023-10-25-002-1-370x239.png)
CoolSpeed mini is a new state-of the-art turbine-driven ultra-high-speed spindle. Due to its unique design, it is possible to operate the spindle with coolant, cutting oil or air mist.
Parameters driven by coolant or cutting oil
- Rotation speed: 30 000 – 80 000 rpm
- Number of jets: 4 pcs
- Operating pressure: 10 – 60 bar
- Flow rate: 24 l/min
- Maximum power: 420 W
- Tool shank: Ø3, Ø4, Ø6 mm
![](https://marketool.hu/wp-content/uploads/2023/08/Kep12.jpg)
Warning: the diagram represents values without loads. The operation speed is approx. 10% lower depending on the load.
Parameters driven by air mist
- Rotation speed: 45 000 – 50 000 rpm
- Number of jets: 12 pcs
- Operating pressure: 4 – 5 bar
- Flow rate: 1040 l/min
- Maximum power: 300 W
- Tool shank: Ø3, Ø4, Ø6 mm
![](https://marketool.hu/wp-content/uploads/2023/08/Kep14.jpg)
Warning: the diagram represents values without loads. The operation speed is approx. 10% lower depending on the load.
Assembling of bearings and turbine onto the cutting tool is made with a special tool. The assembly sequence must be done in the following manner. The tolerance of the tool shank should be h6 or better.
![](https://marketool.hu/wp-content/uploads/2023/08/Kep15.jpg)
![](https://marketool.hu/wp-content/uploads/2023/08/Kep17.jpg)
![](https://marketool.hu/wp-content/uploads/2023/08/Kep18.jpg)
Application examples:
engraving
![](https://marketool.hu/wp-content/uploads/2023/08/Kep19.jpg)
drilling
![](https://marketool.hu/wp-content/uploads/2023/08/Kep20.jpg)
slot milling
![](https://marketool.hu/wp-content/uploads/2023/08/Kep21.jpg)
side milling
![](https://marketool.hu/wp-content/uploads/2023/08/Kep22.jpg)
profile milling
![](https://marketool.hu/wp-content/uploads/2023/08/Kep23.jpg)